11/15/16

HOW TO DECORATE A CHRISTMAS TREE - PART I

                  It's that time of year again.


Time to Deck the Halls,
Jingle the Bells,
Dash Through the Snow...
 and decorate your Christmas Tree.

Decorated tree from Rogers Gardens, Newport Beach, CA
Each year I decorate several client homes for Christmas - along with my own.
Over the years, I've learned a few things that make holiday decorating
a little easier - without losing any impact and with beautiful results.
So, with those lessons learned,
here are a few pointers for decorating your tree,
from someone who does a lot of them each year.

TOP TIPS FOR A BEAUTIFUL CHRISTMAS TREE

1.  FRESH OR FAUX?
I admit, I like a fresh tree.  That being said, I do have faux garlands and greens and some smaller artificial trees in my home, as well.  I like the fresh tree for the smell that hits you each time you walk in the door. I also love the tradition of going to the tree lot and picking out a tree all bundled up (because tree lots are always freezing - even in Southern California)  and bringing it home tied to the top of the car.  Those are good family memories.
Nothing invokes the essence of Christmas more for me.

There are pros and cons for both.  Most artificial trees look a little artificial - right?  (Although some are hard to discern from real).  And they definitely feel artificial.  However, its a huge plus that most come pre-lighted, and that their branches are strong enough to hold more ornaments, and heavier ornaments.  Also a big plus - no watering and no needle drop....and you can put them up early in the season.

But once you have decided what kind of tree - my first awesome tip is:


ELEVATE YOUR TREE
(If you have the ceiling space.)

Even with a large tree.

Even if its only elevated a little.

You will be surprised at the difference it will make.
Canadian House and Home
canadianhouseandhome.com

Use a low table, a chest, some sturdy wooden boxes, or
paint cans covered with fabric….
just get it off the floor.

It does a couple of things:   
It shows it off beautifully, making it even more of a focal point.
 It leaves room at the bottom for lots and lots of packages.


Try to keep it in scale though -
a very large tree will look silly on a tiny table,
(and could be hazardous) 


 2. DON'T SKIMP ON THE LIGHTS
(If you have a pre-lighted faux tree… you can probably skip this part - unless you want to add more magical lights...which is always a possibility and often a good idea!)
via Pinterest
Rule of thumb here is 100 little lights per foot.

That means a MINIMUM of 100 tiny twinkle lights per 1 foot of tree.
Obviously there will be more than that at the fattest part and less than that at the skinny little top part... but you get the idea.
A 7 foot tree should have a minimum of 700 lights.

(If you combine larger lights with twinkle lights, you may need less.)

(If you have a pre-lit tree with less - you might consider adding a strand or two…)

Use of the word minimum here means you are allowed to use more lights than 100 per foot,
as long as you can look at it without sunglasses,
you are probably going to be okay.

My 8' tree last year wore 1200 lights proudly.
There is nothing worse than a dim tree.

Better Homes and Gardens

Plug your light strands in when you put them on the tree so you can see the lights and ultimately the gaps - and avoid them.
And while you are at it, put them on so that they are easily removed - don't wind them around the whole tree unless you want to become dizzy when you remove them...
(no elaborate twisting or wrapping).
 Weave the light strand over and under the smaller branches on each limb so that the lights stay in place, but you will hate yourself when you are removing them if you wrap the lights AROUND the branch... such a pain to remove.

Instead, go from the top to the bottom on one side of the tree, weaving back and forth.  Then go to another side and repeat until you have the entire tree covered.
You'll thank me when it comes time to remove them.

Here's the critical part.... take those light strands into the branches - right back to the trunk - every-so-often.  Try to do it evenly throughout the tree.
via Pinterest
This does an amazing thing - it makes the tree glow from within...
so beautiful!

Connect only the number of light strands together as recommended on the package.
Its generally 3, although some of the new LED strands allow more.
(Don't risk blowing a fuse and losing your lights and having to redo them, or worse yet risking a fire. I use a power strip placed at the back of the tree for all the strands.
It takes only a quick flip of the switch to turn them all off at once.

Or plug the power strip into the wall outlet that has a wall switch..

Or, use a timer…

Or, this cute little extension cord with the on/off button.

Home Depot
[My favorite because you can tap it on and off with your foot!]


As you are putting those lights on the tree, it helps to step back and squint
to make sure you don't have any dark holes -
or missed spaces that need to be filled in.

via pinterest
DON'T MISS THE NEXT INSTALLMENT....
ADDING GARLAND AND RIBBON
AND OTHER STRANGE AND EXCITING THINGS...

15 comments:

  1. This is an awesome post Claudine! I just found your blog through Lynn! Can't wait to dig in more. It's beautiful. My fav tree is the brown and silver one. I copied it to my ideas file and might just have to copy cat that! Hope you don't mind. Such inspiration! Makes me ready to pull out the Christmas decorations!
    I'm your newest follower and would be delighted to have you follow me back!
    www.beatricebanks.blogspot.com

    ReplyDelete
  2. Love all the pictures and tips. Can't wait for you to come decorate my house for Christmas. See you in a week - yeah!

    ReplyDelete
  3. Great post!! Really got me in the mood to start decorating for the Christmas Season!!

    Glad you enjoyed TPT Home!

    ReplyDelete
  4. Hello, Lynn sent me over. I don't know Lynn, but I'm one for following orders. I enjoyed looking at the photos of the holiday decor, even though I'm just a guy. Merry Christmas.

    ReplyDelete
  5. Wow,it's great. I learnt more ways to decorate christmas tree by knowing your suggestion and the trees that were beautifully decorated shown above

    ReplyDelete
  6. I'm loving these beautiful decorations. Have you seen ours? http://roomenvy.wordpress.com/category/christmas-craft-ideas-2/ have a look! :)

    ReplyDelete
  7. hi,
    Useful tips and beautiful blog. I do have some questions though.
    I have some Swarovski Crystal Ornament that I have collected over the years. Most of them are clear snowflakes or stars (their annual releases). How do I arrange it on tree along with the regular decors like balls n bells. I have 5 yr old son and for him bells n Santa hats are more imp than Crystal.
    Can I display my crystal on another wrought iron stand next to the tree? Will that be too much or too tacky? How do I make the crystal snowflake stand out and not get lost....

    ReplyDelete
  8. Resham
    thank you for your kind words. Beautiful ornaments such as your crystal snowflakes deserve a tabletop tree of their own. A small tree can sit atop an end table or sideboard. This blog has several tabletop trees (pictures are always better than words in decorating!). http://habituallychic.blogspot.com/2009/12/tabletop-tannenbaums.html If you wish to keep them on your tree, adding crystal garland and other glittered snowflakes will bring more attention to them. Positioning them in front lights on the tree will show their beauty. Good luck!

    ReplyDelete
  9. Great posts and wonderful tips. Thanks so much!

    ReplyDelete
  10. really great post.. what an awesome pictures beautiful..simply beautiful..

    ReplyDelete
  11. I like the helpful information you provide in your articles. I will bookmark your blog and check again here frequently. I am quite sure I will learn a lot of new stuff right here! Good luck for the next!
    Mobile File Cabinet (SILVER 18567)

    ReplyDelete
  12. Can you tell me about how many ornaments per foot?My tree allways looks neked. TIA.

    ReplyDelete
    Replies
    1. I layer my ornaments - putting some more inside and some on the outside. I can't give you an exact amount, because that would change depending on the type of tree, the type of ornaments, their size, etc., but I can say that if it looks naked, you don't have nearly enough! Good luck.

      Delete
  13. I layer my ornaments - putting some more inside and some on the outside. I can't give you an exact amount, because that would change depending on the type of tree, the type of ornaments, their size, etc., but I can say that if it looks naked, you don't have nearly enough! Good luck.

    ReplyDelete

Highly intelligent comments from amazing readers...

WHAT DID YOU MISS?

link within

Related Posts Plugin for WordPress, Blogger...